Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › PCV VALVE
RM30B0U _51 Engine / Hybrid System _009089 2AR-FE EMISSION CONTROL _0049674 PCV VALVE G

2AR-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 1.INSPECT PCV VALVE

a.

Install a clean hose to the PCV valve.


b.

Check the PCV valve operation.

i.
A293720
2.458,1.844 2.708,1.844 2.708,1.844 2.906,1.448 false 2.292,1.771 2.458,1.938 0.167,0.167 10 *1
*1 Clean Hose
V100135

Cylinder Block Side
V100136

Air


Blow air into the cylinder block side and check that air passes through easily.

If the result is not as specified, replace the PCV valve.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.



ii.
A293721
0.823,1.344 0.99,1.698 0.99,1.698 1.177,1.698 false 1.208,1.615 1.385,1.792 0.177,0.177 10 *1
*1 Clean Hose
V100135

Intake Manifold Side
V100136

Air


Blow air into the intake manifold side and check that air passes through with difficulty.

If the result is not as specified, replace the PCV valve.



c.

Remove the clean hose from the PCV valve.