1.INSPECT INTAKE AIR CONTROL VALVE ACTUATOR
Check the intake air control valve actuator operation.
| *a | Component without harness connected
(Intake Air Control Valve Actuator) |
Check that the motor operates when the battery is connected to the terminals of the intake air control valve actuator.
| Tester Connection | Specified Condition |
|---|---|
| Positive (+) battery voltage applied to terminal 4 (M-), and negative (-) battery voltage applied to terminal 5 (M+) | Motor rotates clockwise |
| Positive (+) battery voltage applied to terminal 5 (M+), and negative (-) battery voltage applied to terminal 4 (M-) | Motor rotates counterclockwise |
If the result is not as specified, replace the intake air control valve actuator.
If the positive and negative battery leads contact the terminals for the sensor, the actuator may be damaged.