Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › CYLINDER HEAD
RM30B0U _51 Engine / Hybrid System _009173 2AR-FE ENGINE MECHANICAL _0050877 CYLINDER HEAD A

2AR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE INTAKE VALVE

a.
A194956
0.087,0.055 0.417,0.205 0.33,0.149 10 SST 1.904,0.075 2.234,0.224 0.33,0.149 10 SST 0.444,0.119 0.573,0.119 0.573,0.119 1.072,0.533 false 2.291,0.153 2.379,0.153 2.379,0.153 2.565,0.223 false

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-00010)


b.

Remove the retainer, compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 2.REMOVE EXHAUST VALVE

a.
A194957
2.48,0.02 2.795,0.166 0.315,0.146 10 SST 2.444,0.092 2.306,0.092 2.306,0.092 2.205,0.682 false 0.753,1.67 1.068,1.816 0.315,0.146 10 SST 0.935,1.654 0.935,1.533 0.935,1.533 0.753,0.401 false

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-00010)


b.

Remove the retainer, compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 3.REMOVE VALVE STEM OIL SEAL

a.
A194958

Using needle-nose pliers, remove the oil seals.


Hide 4.REMOVE VALVE SPRING SEAT

a.
A194959

Using compressed air and a magnet hand, remove the valve spring seat by blowing air onto it.


Hide 5.REMOVE NO. 1 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 1 screw plug or a plug is corroded, replace it.


A194960

a.

Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.


Hide 6.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from the No. 2 screw plug or the plug is corroded, replace it.


A194961

a.

Using a 14 mm hexagon wrench, remove the screw plug and gasket.


Hide 7.REMOVE CYLINDER HEAD STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.