1.REMOVE HOOD TO FRONT END PANEL SEAL
| *1 | Double-sided Tape |
Detach the 9 clips.
Detach the double-sided tape to remove the hood to front end panel seal.
2.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
3.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
4.REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)
Remove the clip.
Remove the 2 screws and front bumper hole cover LH.
5.REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)
Use the same procedure described for the LH side.
6.REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Remove the clip.
Remove the 2 screws and front bumper hole cover LH.
7.REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure described for the LH side.
8.REMOVE RADIATOR GRILLE GARNISH SUB-ASSEMBLY LH
Remove the 2 screws.
Detach the claw.
Detach the 4 clips and remove the radiator grille garnish sub-assembly LH.
9.REMOVE RADIATOR GRILLE GARNISH SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
10.REMOVE FRONT BUMPER EMBLEM SUB-ASSEMBLY
Detach the 2 claws and remove the front bumper emblem sub-assembly.
11.REMOVE FRONT BUMPER ARM HOLE COVER LH
Detach the 2 claws and remove the front bumper arm hole cover LH.
12.REMOVE FRONT BUMPER ARM HOLE COVER RH
Use the same procedure described for the LH side.
13.REMOVE FRONT BUMPER EXTENSION LH
Remove the 5 retainers and front bumper extension LH.
14.REMOVE FRONT BUMPER EXTENSION RH
Use the same procedure described for the LH side.
15.REMOVE LOWER NO. 1 RADIATOR GRILLE
Detach the 18 claws and remove the lower No. 1 radiator grille.
16.REMOVE FRONT BUMPER GUARD
Remove the 8 retainers and front bumper guard.
17.REMOVE FRONT BUMPER MOULDING
Remove the 9 retainers and front bumper moulding.