1.INSTALL REAR BUMPER UPPER RETAINER LH
Install the rear bumper upper retainer LH with the clip.
2.INSTALL REAR BUMPER UPPER RETAINER RH
Use the same procedure described for the LH side.
3.INSTALL REAR BUMPER SIDE SUPPORT LH
Install the rear bumper side support LH with the screw.
Install the clip.
4.INSTALL REAR BUMPER SIDE SUPPORT RH
Use the same procedure described for the LH side.
5.INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH
Install the rear bumper arm sub-assembly LH with the 3 bolts.
6.INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
7.INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY
Install the rear bumper reinforcement sub-assembly with the 6 bolts.
8.INSTALL NO. 2 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR
Install the No. 2 luggage compartment service cover protector with the 2 clips.
9.INSTALL NO. 1 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR
Use the same procedure described for the LH side.
10.INSTALL REAR BUMPER COVER
Attach the 10 claws to install the rear bumper cover.
Install the 2 bolts.
| *1 | Screw A |
| *2 | Screw B |
Install the 2 screws labeled A and screw labeled B.
Use the same procedure to install the screw on the other side.
Install the 6 clips.
11.INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)
| *1 | Screw A |
| *2 | Screw B |
Install the rear quarter panel mudguard LH with the 3 screws labeled A.
Install the 2 screws labeled B.
12.INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)
Use the same procedure described for the LH side.