Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER
RM30B0U _59 Vehicle Exterior _009441 EXTERIOR PANELS / TRIM _0051128 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

a.
B341058
0.302,0.896 0.823,0.896 false 0.51,0.896 0.51,1.323 0.51,1.323 0.844,1.323 false 0.51,1.125 0.823,1.125 false 1.469,1.333 1.781,1.333 false 2.135,1.531 2.448,1.531 false 2.042,1.969 2.354,1.969 false 0.146,0.823 0.458,0.979 0.313,0.156 10 *1 2.469,1.458 2.781,1.615 0.313,0.156 10 *2 2.375,1.885 2.688,2.042 0.313,0.156 10 *2
*1 Screw A
*2 Screw B


Remove the 2 screws labeled B.


b.

Remove the 3 screws labeled A and rear quarter panel mudguard LH.


Hide 2.REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

HINT:

Use the same procedure described for the LH side.


Hide 3.REMOVE REAR BUMPER COVER

a.
B335665

Remove the 6 clips.


b.
B335667
1.333,2.073 1.583,1.823 1.583,1.823 1.906,1.823 false 0.281,1.073 0.281,0.656 0.281,0.656 0.469,0.656 true 0.542,1.771 0.365,1.771 0.365,1.771 0.365,1.552 true 0.521,0.594 0.833,0.75 0.313,0.156 10 *1 1.938,1.74 2.25,1.896 0.313,0.156 10 *2 0.625,1.708 0.938,1.865 0.313,0.156 10 *1
*1 Screw A
*2 Screw B


Remove the 2 screws labeled A and screw labeled B.

HINT:

Use the same procedure to remove the screw on the other side.



c.
B335668

Remove the 2 bolts.


d.
B335669
0.948,1.99 1.135,1.99 1.135,1.99 1.135,1.24 true 0.781,1.896 1.094,2.052 0.313,0.156 10 *1
*1 Protective Tape


Put protective tape around the rear bumper cover.


e.

Detach the 10 claws.


Hide 4.REMOVE NO. 2 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR

B335670

a.

Remove the 2 clips and No. 2 luggage compartment service cover protector.


Hide 5.REMOVE NO. 1 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR

HINT:

Use the same procedure described for the LH side.


Hide 6.REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B335672

Remove the 6 bolts and rear bumper reinforcement sub-assembly.


Hide 7.REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH

a.
B335674

Remove the 3 bolts and rear bumper arm sub-assembly LH.


Hide 8.REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 9.REMOVE REAR BUMPER SIDE SUPPORT LH

a.
B335675
0.583,0.167 0.875,0.406 0.292,0.24 10 90°

Using a screwdriver, turn the clip 90° and remove the clip.


b.

Remove the screw and rear bumper side support LH.


Hide 10.REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 11.REMOVE REAR BUMPER UPPER RETAINER LH

a.
B335676
0.698,1.063 0.969,1.313 0.271,0.25 10 90°

Using a screwdriver, turn the clip 90° and remove the clip and rear bumper upper retainer LH.


Hide 12.REMOVE REAR BUMPER UPPER RETAINER RH

HINT:

Use the same procedure described for the LH side.