Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE
RM30B0U _59 Vehicle Exterior _009441 EXTERIOR PANELS / TRIM _0051130 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL SYMBOL EMBLEM

a.
B338461
0.583,2.667 1.021,2.667 false 2.365,2.813 2.802,2.813 false 0.448,2.594 0.76,2.75 0.313,0.156 10 *1 2.823,2.74 3.135,2.896 0.313,0.156 10 *1
*1 Boss


Install a new symbol emblem.

i.

Using a heat light, heat the back door outside garnish and a new symbol emblem.


ii.

Remove the peeling paper from the face of the symbol emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the boss positions and install the symbol emblem.

HINT:

Press the symbol emblem firmly to install it.




Hide 2.INSTALL NO. 1 BACK DOOR EMBLEM

HINT:

When installing the No. 1 back door emblem, heat the back door panel and No. 1 back door emblem using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 1 Back Door Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 1 back door emblem excessively.


a.

Clean the back door panel surface.

i.

Using a heat light, heat the back door panel surface.


ii.

Remove the double-sided tape from the back door panel.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B341065
0.073,0.052 0.385,0.208 0.313,0.156 10 *a 0.74,1.188 1.052,1.344 0.313,0.156 10 A 1.573,0.229 1.885,0.385 0.313,0.156 10 B
*a Reference Values


Install a new No. 1 back door emblem.

i.

Using a heat light, heat the back door panel and a new No. 1 back door emblem.


ii.

Remove the peeling paper from the face of the No. 1 back door emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 1 back door emblem in the position shown in the illustration.

HINT:

Press the No. 1 back door emblem firmly to install it.


Standard:
Area Specified Condition
A 217.7 mm (8.571 in.)
B 195.7 mm (7.705 in.)




Hide 3.INSTALL NO. 3 BACK DOOR NAME PLATE

HINT:

When installing the No. 3 back door name plate, heat the back door panel and No. 3 back door name plate using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 3 Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 3 back door name plate excessively.


a.

Clean the back door panel surface.

i.

Using a heat light, heat the back door panel surface.


ii.

Remove the double-sided tape from the back door panel.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B341066
0.073,0.052 0.385,0.208 0.313,0.156 10 *a 2.5,1.156 2.813,1.313 0.313,0.156 10 A 1.563,0.146 1.875,0.302 0.313,0.156 10 B
*a Reference Values


for Type A:

Install a new No. 3 back door name plate.

i.

Using a heat light, heat the back door panel and a new No. 3 back door name plate.


ii.

Remove the peeling paper from the face of the No. 3 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 back door name plate in the position shown in the illustration.

HINT:

Press the No. 3 back door name plate firmly to install it.


Standard:
Area Specified Condition
A 216.7 mm (8.531 in.)
B 213.5 mm (8.405 in.)




c.
B341067
0.063,0.052 0.375,0.208 0.313,0.156 10 *a 2.51,1.198 2.823,1.354 0.313,0.156 10 A 1.625,0.146 1.938,0.302 0.313,0.156 10 B
*a Reference Values


for Type B:

Install a new No. 3 back door name plate.

i.

Using a heat light, heat the back door panel and a new No. 3 back door name plate.


ii.

Remove the peeling paper from the face of the No. 3 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 back door name plate in the position shown in the illustration.

HINT:

Press the No. 3 back door name plate firmly to install it.


Standard:
Area Specified Condition
A 215.6 mm (8.488 in.)
B 202.7 mm (7.98 in.)




d.
B341068
0.063,0.052 0.375,0.208 0.313,0.156 10 *a 2.51,1.188 2.823,1.344 0.313,0.156 10 A 1.635,0.167 1.948,0.323 0.313,0.156 10 B
*a Reference Values


for Type C:

Install a new No. 3 back door name plate.

i.

Using a heat light, heat the back door panel and a new No. 3 back door name plate.


ii.

Remove the peeling paper from the face of the No. 3 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 back door name plate in the position shown in the illustration.

HINT:

Press the No. 3 back door name plate firmly to install it.


Standard:
Area Specified Condition
A 213 mm (8.386 in.)
B 191.2 mm (7.528 in.)




Hide 4.INSTALL NO. 4 BACK DOOR NAME PLATE

HINT:

When installing the No. 4 back door name plate, heat the back door panel and No. 4 back door name plate using a heat light.


Standard:
Item Temperature
back door panel 40 to 60°C (104 to 140°F)
No. 4 Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 4 back door name plate excessively.


a.

Clean the back door panel surface.

i.

Using a heat light, heat the back door panel surface.


ii.

Remove the double-sided tape from the back door panel.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B338463
0.156,0.135 0.469,0.292 0.313,0.156 10 *a 2.604,1.26 2.917,1.417 0.313,0.156 10 A 1.698,0.229 2.01,0.385 0.313,0.156 10 B
*a Reference Values


Install a new No. 4 back door name plate.

i.

Using a heat light, heat the back door panel and a new No. 4 back door name plate.


ii.

Remove the peeling paper from the face of the No. 4 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 4 back door name plate in the position shown in the illustration.

HINT:

Press the No. 4 back door name plate firmly to install it.


Standard:
Area Specified Condition
A 187.8 mm (7.394 in.)
B 211.6 mm (8.331 in.)