Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE
RM30B0U _59 Vehicle Exterior _009441 EXTERIOR PANELS / TRIM _0051130 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


PROCEDURE

Hide 1.REMOVE SYMBOL EMBLEM

HINT:

When removing the symbol emblem, heat the back door outside garnish and symbol emblem using a heat light.


Standard:
Item Temperature
Back Door Outside Garnish 20 to 30°C (68 to 86°F)
Symbol Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish or symbol emblem excessively.


a.
B338458
0.521,1.125 0.667,1.125 0.667,1.125 0.667,0.76 true 1.906,1.573 1.906,1.792 1.906,1.792 2.188,1.792 true 0.438,2.74 1.031,2.74 false 2.354,2.885 2.708,2.885 false 2.25,1.708 2.563,1.865 0.313,0.156 10 *1 0.344,1.042 0.656,1.198 0.313,0.156 10 *2 2.771,2.813 3.083,2.969 0.313,0.156 10 *3 0.24,2.667 0.552,2.823 0.313,0.156 10 *3
*1 Protective Tape
*2 Wooden Block
*3 Boss


Put protective tape around the symbol emblem.


b.

Insert piano wire between the back door outside garnish and symbol emblem.

HINT:

Be careful of the boss positions.



c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the back door outside garnish.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the symbol emblem.


Hide 2.REMOVE NO. 1 BACK DOOR EMBLEM

HINT:

When removing the No. 1 back door emblem, heat the back door panel and No. 1 back door emblem using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 1 Back Door Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 1 back door emblem excessively.


a.
B341061
0.333,1.563 0.583,1.563 0.583,1.563 0.583,1.135 true 2.292,1.188 2.292,0.771 2.292,0.771 2.698,0.771 true 2.729,0.698 3.042,0.854 0.313,0.156 10 *1 0.188,1.49 0.5,1.646 0.313,0.156 10 *2
*1 Protective Tape
*2 Wooden Block


Insert piano wire between the back door panel and No. 1 back door emblem.


b.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


c.

Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door emblem to the back door panel.

NOTICE:

Be careful not to damage the back door panel.



d.

Remove the No. 1 back door emblem.


Hide 3.REMOVE NO. 3 BACK DOOR NAME PLATE

HINT:

When removing the No. 3 back door name plate, heat the back door panel and No. 3 back door name plate using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 3 Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 3 back door name plate excessively.


a.
B341062
0.323,1.531 0.594,1.531 0.594,1.531 0.594,1.125 true 2.375,0.292 2.115,0.292 2.115,0.292 2.115,1.021 true 2.417,0.219 2.729,0.375 0.313,0.156 10 *1 0.177,1.469 0.49,1.625 0.313,0.156 10 *2
*1 Protective Tape
*2 Wooden Block


for Type A:

i.

Put protective tape around the No. 3 back door name plate.


ii.

Insert piano wire between the back door panel and No. 3 back door name plate.


iii.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


iv.

Pull the piano wire and scrape off the double-sided tape that holds the No. 3 back door name plate to the back door panel.

NOTICE:

Be careful not to damage the back door panel.



v.

Remove the No. 3 back door name plate.



b.
B341063
0.344,1.542 0.688,1.542 0.688,1.542 0.688,1.094 true 2.479,0.26 2.167,0.26 2.167,0.26 2.167,1 true 2.531,0.188 2.844,0.344 0.313,0.156 10 *1 0.188,1.469 0.5,1.625 0.313,0.156 10 *2
*1 Protective Tape
*2 Wooden Block


for Type B:

i.

Put protective tape around the No. 3 back door name plate.


ii.

Insert piano wire between the back door panel and No. 3 back door name plate.


iii.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


iv.

Pull the piano wire and scrape off the double-sided tape that holds the No. 3 back door name plate to the back door panel.

NOTICE:

Be careful not to damage the back door panel.



v.

Remove the No. 3 back door name plate.



c.
B341064
0.354,1.542 0.594,1.542 0.594,1.542 0.771,1.031 true 2.615,0.24 2.271,0.24 2.271,0.24 2.271,0.927 true 2.646,0.167 2.958,0.323 0.313,0.156 10 *1 0.198,1.469 0.51,1.625 0.313,0.156 10 *2
*1 Protective Tape
*2 Wooden Block


for Type C:

i.

Put protective tape around the No. 3 back door name plate.


ii.

Insert piano wire between the back door panel and No. 3 back door name plate.


iii.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


iv.

Pull the piano wire and scrape off the double-sided tape that holds the No. 3 back door name plate to the back door panel.

NOTICE:

Be careful not to damage the back door panel.



v.

Remove the No. 3 back door name plate.



Hide 4.REMOVE NO. 4 BACK DOOR NAME PLATE

HINT:

When removing the No. 4 back door name plate, heat the back door panel and No. 4 back door name plate using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 4 Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 4 back door name plate excessively.


a.
B338460
1.844,1.208 1.833,0.865 1.833,0.865 2.333,0.865 true 0.448,1.823 0.667,1.823 0.667,1.823 0.667,1.396 true 2.396,0.802 2.708,0.958 0.313,0.156 10 *1 0.24,1.75 0.552,1.906 0.313,0.156 10 *2
*1 Protective Tape
*2 Wooden Block


Insert piano wire between the back door panel and No. 4 back door name plate.


b.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


c.

Pull the piano wire and scrape off the double-sided tape that holds the No. 4 back door name plate to the back door panel.

NOTICE:

Be careful not to damage the back door panel.



d.

Remove the No. 4 back door name plate.