Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM30B0U _53 Suspension _009475 REAR SUSPENSION _0051208 REAR SHOCK ABSORBER G

REAR SUSPENSION  REAR SHOCK ABSORBER  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR SHOCK ABSORBER ASSEMBLY LH

a.

Compress and extend the shock absorber rod and check that there is no abnormal resistance or unusual sound during operation.

If there is any abnormality, replace the shock absorber with a new one.

NOTICE:

When disposing of the shock absorber, refer to the Disposal procedures (See page Suspension>REAR SUSPENSION>REAR SHOCK ABSORBER>DISPOSAL).