A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
1.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
Install the rear console box sub-assembly with the 4 bolts and 2 screws.
2.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Attach the 5 clips to install the lower center instrument panel finish panel.
3.INSTALL CONSOLE BOX CARPET
Install the console box carpet.
4.INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
Attach the 4 claws to install the upper rear console panel sub-assembly.
5.INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH
Attach the guide and 2 clips to install the inner No. 1 instrument panel bracket cover LH.
6.INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH
Attach the guide and 2 clips to install the inner No. 1 instrument panel bracket cover RH.
7.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Connect the connector.
Attach the 12 clips to install the upper console panel sub-assembly.
8.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
Attach the 9 clips and claw to install the parking brake hole cover sub-assembly.
9.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.