1.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Install the console compartment door lock sub-assembly to the console compartment door sub-assembly with the 2 screws.
2.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (except Slide Console Type)
Install the console compartment door sub-assembly to the rear console box sub-assembly with 2 new bushes.
Push in the shaft until it contacts the bush.
Try to move the shaft left and right and check that there is no rattle.
3.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (for Slide Console Type)
Install the console compartment door sub-assembly with the 4 screws.
4.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
Attach the 2 clips and 4 claws to install the console rear end panel sub-assembly.