Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM30B0U _59 Vehicle Exterior _009875 DOOR / HATCH _0054298 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE BACK DOOR STAY ASSEMBLY LH

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.



a.
B336845
0.865,0.698 0.719,0.49 false 2.417,1.552 2.615,1.656 false 0.885,0.625 1.198,0.781 0.313,0.156 10 *a 2.25,1.448 2.563,1.646 0.313,0.198 10 *a 1.01,0.042 1.469,0.24 0.458,0.198 10 (1) 0.417,0.073 0.875,0.271 0.458,0.198 10 (2) 2.917,1.76 3.375,1.958 0.458,0.198 10 (1) 3.104,1.594 3.375,1.813 0.271,0.219 10 (2)
*a Protective Tape


Using a screwdriver, remove the 2 stop rings as indicated by the arrows in the order shown in the illustration.

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joint and remove the back doorstay assembly LH.

NOTICE:

Remove the back door stay assembly while supporting the back door by hand.



Hide 2.REMOVE BACK DOOR STAY ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 3.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET LH

a.
B336846

Remove the 2 bolts and back door damper stay upper bracket LH.


Hide 4.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 5.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET LH

a.
B336847

Remove the 2 bolts and back door damper stay lower bracket LH.


Hide 6.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET RH

HINT:

Use the same procedure described for the LH side.