Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING VALVE
RM30B0U _53 Suspension _009252 TIRE PRESSURE MONITORING _0054774 TIRE PRESSURE WARNING VALVE N

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING VALVE  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:

The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly.


PROCEDURE

Hide 1.DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER

a.
C278928
0.208,0.146 0.521,0.344 0.313,0.198 10 *A 0.25,2.354 0.563,2.552 0.313,0.198 10 *B
*A except TMMC Made, and for TMMC Made w/ Smart Key System
*B for TMMC Made w/o Smart Key System


Using the tip of a screwdriver, pry off the back cover.


b.
C278929
1.969,2.26 1.49,2.26 1.49,2.26 1.49,1.594 true 1.635,2.25 1.635,1.781 true 2.688,4.521 1.823,4.521 1.823,4.521 1.823,4.208 true 2.219,4.521 2.219,4 true 0.771,2.26 1.01,2.26 1.01,2.26 1.271,1.75 true 2.135,3.854 2.354,3.344 2.354,3.344 2.635,3.344 true 0.146,0.135 0.458,0.333 0.313,0.198 10 *A 0.219,2.552 0.531,2.75 0.313,0.198 10 *B 2.052,2.135 2.365,2.333 0.313,0.198 10 *1 2.781,4.417 3.094,4.615 0.313,0.198 10 *1 2.719,3.229 3.031,3.427 0.313,0.198 10 *2 0.594,2.104 0.906,2.302 0.313,0.198 10 *2
*A except TMMC Made, and for TMMC Made w/ Smart Key System
*B for TMMC Made w/o Smart Key System
*1 Terminal
*2 Lithium Battery


Cut the 2 terminals that connect the battery to the base board and remove the battery.

HINT:

The battery and base board are covered with urethane.