Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054778 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) W

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  CUSTOMIZE PARAMETERS  


1. CUSTOMIZE AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)


a.

Customizing with the Techstream

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the Techstream.


ii.

Turn the ignition switch to ON.


iii.

Turn the Techstream on.


iv.

Enter the following menus: Customize Setting / Air Conditioner.


v.

Select the setting by referring to the table below.

Air Conditioner
Tester Display Description Default Setting ECU
Set Temperature Shift Function to perform control with the shifted temperature versus the displayed temperature Normal 00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C Air Conditioning Amplifier Assembly
Evaporator Control Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
Compressor Mode Function to turn the air conditioning on automatically by pressing the AUTO button when the blower is on and the air conditioning is off Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
Air Inlet Mode Function to change the mode automatically to RECIRCULATION mode in cases when the air conditioning is turned on to cool the cabin down quickly Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
Foot/DEF Auto Mode Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
Foot/DEF Automatic Blow Up Function Function to increase the blower level automatically when the defroster is ON ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
ECO MODE Cancel Function to cancel the ECO mode drive when item is ON OFF 0:OFF,1:ON Air Conditioning Amplifier Assembly
Refrigerant Shortage Check Function to cancel the refrigerant gas volume check (check performed during normal operation) when item is OFF ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
Fan speed increment control Function to define how fast the air conditioning blower goes to target speed when first activating the air conditioning Normal 001:Slow,010:Normal,100:Fast Air Conditioning Amplifier Assembly
Blower Operation Setting (Stop&Start) This customization is an item that sets the blower level to "1" while the Stop and Start System is controlling the idling stop Blower OFF 0:Blower OFF,1:Blower Level 1 Air Conditioning Amplifier Assembly
50006 11