Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY
RM30B0U _58 Vehicle Interior _009991 SEAT BELT _0054791 FRONT SEAT OUTER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT SEAT OUTER BELT ASSEMBLY

a.
B334891
2.583,1.635 2.427,1.198 false 2.583,1.646 1.823,1.573 false 2.604,1.625 2.917,1.823 0.313,0.198 10 *1 2.406,0.052 2.719,0.25 0.313,0.198 10 *a 0.594,1.063 0.906,1.26 0.313,0.198 10 *b 1.24,0.354 1.552,0.552 0.313,0.198 10 *c
*1 Retractor
*a Unlocked
*b Locked
*c 45°


Before installing the front seat outer belt assembly, check the ELR.

i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the front seat outer belt assembly.

NOTICE:

Do not disassemble the retractor.




b.

for Front Passenger Side, w/ ALR:

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.


i.

When the belt is pulled out fully, the belt should automatically start to retract.


ii.

After the belt has fully retracted, the belt should be able to be pulled out and retracted again.

If the operation is not as specified, replace the front seat outer belt assembly.