1.INSTALL REAR SEAT INNER BELT ASSEMBLY RH
Install the rear seat inner belt assembly RH with the bolt.
2.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH
| *1 | Protruding Part |
Install the rear center seat lap type belt assembly RH with the bolt.
The anchor part of the rear center seat lap type belt assembly RH must not overlap the protruding part.
3.INSTALL REAR SEAT ASSEMBLY RH
4.INSTALL REAR SEAT INNER BELT ASSEMBLY LH
Install the rear seat inner belt assembly LH with the bolt.
5.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH
| *1 | Protruding Part |
Pass the rear center seat lap type belt assembly LH through the rubber band of the separate type rear seat cushion cover.
Install the rear center seat lap type belt assembly LH with the bolt.
The anchor part of the rear center seat lap type belt assembly LH must not overlap the protruding part.
6.INSTALL REAR SEAT ASSEMBLY LH