Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0054848 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted  


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller's voice can be heard properly.

HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



Result:
Proceed to
Voice can be heard properly
Voice cannot be heard properly



Voice can be heard properly

2.CHECK AUDIO AND VISUAL SYSTEM

Voice cannot be heard properly

REPAIR OR REPLACE CELLULAR PHONE

2.CHECK AUDIO AND VISUAL SYSTEM
a.

Check that sound from the audio system can be heard from a front speaker.


Result:
Proceed to
Sound can be heard from the audio system
Sound cannot be heard from the audio system



Sound can be heard from the audio system

3.CHECK AUDIO SETTINGS

Sound cannot be heard from the audio system

GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE

3.CHECK AUDIO SETTINGS
a.

Check that the received voice level is not set to low.


Result:
Proceed to
The received voice level is not set to low
The received voice level is set to low



The received voice level is not set to low

GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE

The received voice level is set to low

SET VOLUME TO HIGH