Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.12–2013.11
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0054849 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted  


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller's voice can be heard properly.

HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



Result:
Proceed to
Voice can be heard properly
Voice cannot be heard properly



Voice can be heard properly

2.CHECK VOICE GUIDANCE FUNCTION

Voice cannot be heard properly

REPAIR OR REPLACE CELLULAR PHONE

2.CHECK VOICE GUIDANCE FUNCTION
a.

Check that voice guidance sound can be heard from a front speaker.


Result:
Proceed to
Sound from the audio system can be heard
Sound from the audio system cannot be heard



Sound from the audio system can be heard

3.CHECK AUDIO SETTINGS

Sound from the audio system cannot be heard

GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE

3.CHECK AUDIO SETTINGS
a.
E227328
0.107,0.027 0.346,0.229 0.24,0.203 10 *a
*a Example


Display the "Call" screen.


b.

Check that the volume level is not set to low.


Result:
Proceed to
The level is not set to low
The level is set to low



The level is not set to low

The level is set to low

SET VOLUME TO HIGH