Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM
RM30B0U _51 Engine / Hybrid System _010069 CRUISE CONTROL _0054851 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  DTC CHECK / CLEAR  


CHECK FOR DTC


a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Chassis / Lane Departure Alert / Trouble Codes.


e.

Check for DTCs.

Chassis > Lane Departure Alert > Trouble Codes
50001 355


CLEAR DTC


a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Chassis / Lane Departure Alert / Clear DTCs.


e.

Clear the DTCs.

Chassis > Lane Departure Alert > Clear DTCs
50002 355