AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK (w/ Automatic Light Control System)
Turn the ignition switch to ON.
Turn the headlight dimmer switch to the AUTO position.
Cover the automatic light control sensor.
Check that the taillights and low beam headlights come on.
Uncover the automatic light control sensor.
Check that the low beam headlights and taillights turn off.
LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK
w/ Automatic Light Control System:
Turn the ignition switch to ON.
Set the headlight dimmer switch to the AUTO position to illuminate the lights.
Turn the ignition switch off.
Open any of the doors (including back door).
Close all of the doors (including back door).
Check that the headlights, taillights, parking lights, license plate lights and side marker lights go off after 30 seconds (delay function).
w/o Automatic Light Control System:
Turn the ignition switch to ON.
Set the headlight dimmer switch to the tail or head position to illuminate the lights.
Turn the ignition switch off.
When 20 minutes have elapsed with 1 or more doors in an opened state, check that the headlights, taillights, parking lights, license plate lights and side marker lights turn off (battery saving function).
DAYTIME RUNNING LIGHT SYSTEM
Headlight dimmer switch is in the off (w/o DRL OFF switch) or AUTO (w/ Automatic Light Control System) position (and the low beam headlights are not turned on via the automatic light control system).
Headlight dimmer switch not in the DRL OFF position. (w/ DRL OFF switch)
Start the engine.
Release the parking brake.
Check that the daytime running lights come on.