Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM
RM30B0U _59 Vehicle Exterior _010071 LIGHTING (EXT) _0054854 AUTOMATIC HIGH BEAM SYSTEM D

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Trouble Codes
50001 123

Enter the following menus: Chassis / Lane Departure Alert / Trouble Codes.

Chassis > Lane Departure Alert > Trouble Codes
50001 355

e.

Check for DTCs.



CLEAR DTC


a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Body Electrical / Main Body / Clear DTCs.

Body Electrical > Main Body > Clear DTCs
50002 123

Enter the following menus: Chassis / Lane Departure Alert / Clear DTCs.

Chassis > Lane Departure Alert > Clear DTCs
50002 355

e.

Clear the DTCs.