Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM
RM30B0U _59 Vehicle Exterior _010071 LIGHTING (EXT) _0054854 AUTOMATIC HIGH BEAM SYSTEM U

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  FAIL-SAFE CHART  


AUTOMATIC HIGH BEAM SYSTEM


a.

The main body ECU (multiplex network body ECU) operates in fail-safe mode if an abnormal condition such as those listed below has been detected.

Item Abnormality Detection Condition Return Condition Warning
Yaw Rate Signal Malfunction Normal yaw rate signal is not detected. Normal yaw rate signal is detected. Automatic high beam indicator light changes from green to yellow
Speed Sensor Signal Malfunction Normal speed sensor signal is not detected. Normal speed sensor signal is detected. Automatic high beam indicator light changes from green to yellow
CAN Communication Signal Malfunction Normal CAN communication signal is not detected. Normal CAN communication signal is detected. Automatic high beam indicator light changes from green to yellow
Lane Departure Warning Camera Signal Malfunction Normal lane departure warning camera signal is not detected. Normal lane departure warning camera signal is detected. Automatic high beam indicator light changes from green to yellow