Home › Vehicle Exterior › LIGHTING (EXT) › RELAY
RM30B0U _59 Vehicle Exterior _010071 LIGHTING (EXT) _0054918 RELAY G

LIGHTING (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT HEADLIGHT RELAY

a.
E270721

Remove the headlight relay from the engine room relay box LH.


b.
E256069
2.281,1.146 2.542,1.104 false 2.698,0.708 2.958,0.667 false 2.802,1.219 3,1.115 false 2.635,1.531 2.635,1.375 false 0.281,1.375 0.438,1.573 0.156,0.198 10 1 2.719,1.156 2.948,1.354 0.229,0.198 10 1 1.573,1.375 1.729,1.573 0.156,0.198 10 2 2.563,1.021 2.719,1.219 0.156,0.198 10 2 1.573,0.76 1.729,0.958 0.156,0.198 10 5 2.604,1.229 2.76,1.427 0.156,0.198 10 5 0.292,0.552 0.448,0.75 0.156,0.198 10 3 2.979,0.583 3.135,0.781 0.156,0.198 10 3

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the headlight relay.



c.

Install the headlight relay to the engine room relay box LH.


Hide 2.INSPECT FOG LIGHT RELAY (w/ Fog Light)

a.
E270722

Remove the fog light relay from the engine room relay box RH.


b.
E256070
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.271,1.375 0.427,1.573 0.156,0.198 10 1 1.573,1.375 1.729,1.573 0.156,0.198 10 2 0.271,0.656 0.427,0.854 0.156,0.198 10 3 1.573,0.875 1.729,1.073 0.156,0.198 10 5 2.927,0.719 3.083,0.917 0.156,0.198 10 3 2.823,1.063 2.979,1.26 0.156,0.198 10 5 2.729,1.406 2.885,1.604 0.156,0.198 10 1 2.615,1.229 2.771,1.427 0.156,0.198 10 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the fog light relay.



c.

Install the fog light relay to the engine room relay box RH.


Hide 3.INSPECT RUNNING LIGHT RELAY

a.
E270720

Remove the running light relay from the engine room relay box LH.


b.
E191082
0.729,0.99 1.271,1.135 true 1.542,1.198 1.125,1.708 true 1.885,1.208 1.719,1.719 true 2.25,1.156 2.688,1.125 true 2.229,0.563 2.063,1.073 true 0.938,1.729 1.552,1.927 0.615,0.198 10 HLOL 2.75,1.031 3.198,1.25 0.448,0.219 10 HLOR 2.104,0.365 2.552,0.583 0.448,0.219 10 DRLS 1.667,1.74 1.823,1.938 0.156,0.198 10 E 0.51,0.896 0.823,1.094 0.313,0.198 10 +B

Check the pulses.

i.

Check for pulses according to the value(s) in the table below.

Standard:
Tester Connection Condition Specified Condition
1 (HLOR) - Negative (-) battery terminal Positive (+) lead of battery connected to terminal 6 (+B) and negative (-) lead connected to terminals 2 (DRLS) and 3 (E) Pulse generation
5 (HLOL) - Negative (-) battery terminal


If the result is not as specified, replace the running light relay.



c.

Install the running light relay to the engine room relay box LH.