Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM30B0U _55 Steering _010121 POWER ASSIST SYSTEMS _0054952 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  U0100/41  Lost Communication with ECM/PCM "A"  U0129/42  Lost Communication with Brake System Control Module  


DESCRIPTION

The power steering ECU assembly receives signals from the ECM and skid control ECU (brake actuator assembly) via the CAN communication system.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition
U0100/41 Lost Communication with ECM/PCM "A" Lost communication with ECM
·

CAN communication system

·

ECM


When an error occurs during steering assist, the warning light does not illuminate. For errors that occur before assist (at the time of the decision to start assist), the warning light illuminates. After normal confirmation
U0129/42 Lost Communication with Brake System Control Module Lost communication with skid control ECU (brake actuator assembly)
·

CAN communication system

·

Skid control ECU (brake actuator assembly)


On After normal confirmation

PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

Result:
Proceed to
NEXT



NEXT

END