Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054977 AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  AIR CONDITIONING UNIT  REASSEMBLY  


PROCEDURE

Hide 2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the No. 1 cooler evaporator sub-assembly.

Compressor Oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



c.
E265962

Install the No. 1 cooler evaporator sub-assembly with the No. 1 cooler thermistor to the upper heater case.


d.

Attach the clamp.


e.
E265961

Attach the 2 guides and 2 claws to install the lower heater case.


f.

Install the 4 screws.


Hide 3.INSTALL COOLER EXPANSION VALVE

a.
E265960

Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 4.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
E265963

Install the heater radiator unit sub-assembly to the air conditioning radiator assembly as shown in the illustration.


b.

Install the clamp with the screw.


Hide 5.INSTALL AIRMIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

E265964
0.896,3.604 1.094,4.219 1.094,4.219 1.094,3.542 true 2.969,4.177 2.479,3.615 true 2.938,4.177 3.25,4.375 0.313,0.198 10 *a 1.042,4.219 1.354,4.417 0.313,0.198 10 *a
*a Reference Point


a.

Using the reference points, attach the 3 claws to install the air mix damper control cable sub-assembly.


Hide 6.INSTALL NO. 2 HEATER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
E265965
1.542,1.125 0.99,0.833 0.99,0.833 1.719,0.979 true 0.844,0.719 1.156,0.917 0.313,0.198 10 *a
*a Reference Point


Using the reference points, engage the 3 claws to install the No. 2 heater control cable sub-assembly.


Hide 7.INSTALL NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E260970
1.823,0.948 1.948,1.542 1.948,1.542 1.948,0.927 true 1.896,1.552 2.208,1.75 0.313,0.198 10 *a
*a Reference Point


Using the reference points, install the No. 3 air conditioning radiator damper servo sub-assembly with the 3 screws.


Hide 8.INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E265966
1.74,3.573 2.615,3.292 2.615,3.292 1.802,3.708 true 2.635,3.188 2.948,3.385 0.313,0.198 10 *a
*a Reference Point


Using the reference points, install the No. 2 air conditioning radiator damper servo sub-assembly with the 3 screws.


Hide 9.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E265968
1.583,1.094 1.927,1.771 1.927,1.771 1.656,1.063 true 1.896,1.781 2.208,1.979 0.313,0.198 10 *a
*a Reference Point


Using the reference points, install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.


Hide 10.INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)