Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054978 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 1.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
E265984

Install the link of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.


b.

Install the No. 1 blower damper servo sub-assembly with the 2 screws.


Hide 2.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E265985

Install the link of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.


b.

Install the No. 1 blower damper servo sub-assembly with the 2 screws.


Hide 3.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
E265980

Install the blower motor with fan sub-assembly with the 3 screws.


Hide 4.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E265981

Install the blower motor with fan sub-assembly with the 3 screws.


Hide 5.INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)

a.
E265979

Install the blower resistor with the 2 screws.