Home › Vehicle Interior › HEATING / AIR CONDITIONING › COOLER EXPANSION VALVE
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054982 COOLER EXPANSION VALVE A

HEATING / AIR CONDITIONING  COOLER EXPANSION VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL COOLER EXPANSION VALVE

a.

Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

Compressor Oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.


c.

Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 3.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT