Home › Vehicle Interior › HEATING / AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054987 AMBIENT TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  AMBIENT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLER (AMBIENT TEMPERATURE SENSOR) THERMISTOR

a.
E269966
3.094,1.396 2.958,1.396 2.958,1.396 2.885,0.656 true 1.719,2.698 1.583,2.698 1.583,2.698 1.365,2.958 true 0.354,0.302 0.583,0.49 0.229,0.188 10 *a 1.75,4.375 1.979,4.563 0.229,0.188 10 *d 3.135,1.281 3.365,1.469 0.229,0.188 10 *b 0.083,2.75 0.313,2.938 0.229,0.188 10 *c 1.76,2.604 1.99,2.792 0.229,0.188 10 *e
*a Component without harness connected
(Cooler (Ambient Temperature Sensor) Thermistor)
*b Sensing Portion
*c Resistance (kΩ)
*d Temperature (°C (°F))
*e Allowable Range


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
1 - 2 15°C (59°F) 2.45 to 2.88 kΩ
1 - 2 20°C (68°F) 1.95 to 2.30 kΩ
1 - 2 25°C (77°F) 1.60 to 1.80 kΩ
1 - 2 30°C (86°F) 1.28 to 1.47 kΩ
1 - 2 35°C (95°F) 1.00 to 1.22 kΩ
1 - 2 40°C (104°F) 0.80 to 1.00 kΩ
1 - 2 45°C (113°F) 0.65 to 0.85 kΩ
1 - 2 50°C (122°F) 0.50 to 0.70 kΩ
1 - 2 55°C (131°F) 0.44 to 0.60 kΩ
1 - 2 60°C (140°F) 0.36 to 0.50 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensor may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the result is not as specified, replace the cooler (ambient temperature sensor) thermistor.