1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Side Turn Signal Light Assembly LH) |
Apply battery voltage to the connector and check the light illumination condition.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E) |
Illuminates |
If the result is not as specified, replace the side turn signal light assembly LH.
2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Side Turn Signal Light Assembly RH) |
Apply battery voltage to the connector and check the light illumination condition.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E) |
Illuminates |
If the result is not as specified, replace the side turn signal light assembly RH.