Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM30B0U _59 Vehicle Exterior _010071 LIGHTING (EXT) _0055110 LICENSE PLATE LIGHT ASSEMBLY A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

a.

Attach the 2 claws to install the license plate light assembly LH.


b.

Connect the connector.


Hide 2.INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER

a.

Attach the 4 guides and 4 claws to install the No. 1 back door service hole cover.