Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM30B0U _59 Vehicle Exterior _010071 LIGHTING (EXT) _0055114 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
E269230
0.833,0.24 1.146,0.396 0.313,0.156 10 *a 2.333,0.271 2.646,0.427 0.313,0.156 10 *b
*a Component without harness connected
(Stop Light Switch Assembly)
*b Shaft pushed


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Shaft released Below 1 Ω
Shaft pushed 10 kΩ or higher


If the result is not as specified, replace the stop light switch assembly.