Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM
RM30B0U _58 Vehicle Interior _010074 SUPPLEMENTAL RESTRAINT SYSTEMS _0056337 OCCUPANT CLASSIFICATION SYSTEM Y

SUPPLEMENTAL RESTRAINT SYSTEMS  OCCUPANT CLASSIFICATION SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use the following procedure to troubleshoot the occupant classification system.

·

*: Use the Techstream.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS

NEXT

3.INSPECT BATTERY VOLTAGE
3.INSPECT BATTERY VOLTAGE
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


Result:
Proceed to
NEXT



NEXT

4.PASSENGER AIRBAG ON/OFF INDICATOR CHECK
4.PASSENGER AIRBAG ON/OFF INDICATOR CHECK

Result:
Proceed to
NEXT



NEXT

5.CHECK DTC (Present and History DTCs)*
5.CHECK DTC (Present and History DTCs)*

Result:
Proceed to
DTC is output
DTC is not output



DTC is output

6.DTC CHART

DTC is not output

6.DTC CHART

Result:
Proceed to
NEXT



NEXT

7.CIRCUIT INSPECTION*
7.CIRCUIT INSPECTION*
Result:
Proceed to
NEXT



NEXT

8.REPAIR
8.REPAIR
Result:
Proceed to
NEXT



NEXT

9.CHECK DTCS (Present and History DTCs)*
9.CHECK DTCS (Present and History DTCs)*

Result:
Proceed to
NEXT



NEXT

10.CHECK DTC*
10.CHECK DTC*

Result:
Proceed to
DTC is not output
DTC is output



DTC is not output

11.CONFIRM SIMULATION

DTC is output

11.CONFIRM SIMULATION
a.

Check the passenger airbag ON/OFF indicator condition.


Result:
Result Proceed to
Passenger airbag ON/OFF indicator operates normally A
Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on B



A

12.CONFIRMATION TEST

B

12.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END