Home › Engine / Hybrid System › 2AR-FE STARTING › RELAY
RM30B0U _51 Engine / Hybrid System _010840 2AR-FE STARTING _0057909 RELAY G

2AR-FE STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT STARTER RELAY (ST)

a.
A188757
2.708,0.573 2.833,0.208 2.833,0.208 3.052,0.208 false 2.135,0.563 2,0.208 2,0.208 1.771,0.208 false 2.646,1.115 3.063,1.115 false 2.646,1.604 3.063,1.604 false 1.646,0.125 1.802,0.323 0.156,0.198 10 1 3.115,0.135 3.271,0.333 0.156,0.198 10 2 3.125,1.031 3.281,1.229 0.156,0.198 10 5 3.115,1.51 3.271,1.708 0.156,0.198 10 3 0.313,1.25 0.469,1.448 0.156,0.198 10 1 0.313,0.771 0.469,0.969 0.156,0.198 10 3 1.323,0.771 1.479,0.969 0.156,0.198 10 5 1.323,1.271 1.479,1.469 0.156,0.198 10 2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.