Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM30B0U _54 Brake _010844 BRAKE (FRONT) _0057930 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C127060
0.844,0.885 0.563,1.25 0.563,1.25 0.563,1.427 false 2.542,1.375 2.26,1.865 2.26,1.865 2.104,1.865 false 0.469,1.448 0.698,1.615 0.229,0.167 10 false *a 1.896,1.781 2.104,1.969 0.208,0.188 10 false *a
*a Protective Tape


Using a screwdriver, remove the front disc brake set ring from the cylinder boot.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the brake piston and cylinder.



b.

Using a screwdriver, remove the cylinder boot from the disc brake cylinder.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the brake piston and cylinder.



Hide 2.REMOVE FRONT DISC BRAKE PISTON

a.
C279253
0.813,1.021 0.906,1.406 0.906,1.406 0.906,1.635 false 0.854,1.688 1.083,1.854 0.229,0.167 10 *a
*a Cloth


Place a piece of cloth between the piston and disc brake cylinder.


b.

Apply compressed air to remove the piston from the disc brake cylinder.

CAUTION:

Do not place your fingers in front of the piston when applying compressed air.


NOTICE:

Be careful not to spatter the brake fluid.



Hide 3.REMOVE PISTON SEAL

a.
C127062
2.51,0.479 2.396,0.479 2.396,0.479 1.542,1.24 false 2.542,0.396 2.698,0.552 0.156,0.156 10 *a
*a Protective Tape


Using a screwdriver, pry out the seal from the disc brake cylinder.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the inner cylinder and piston seal groove.



Hide 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG

a.

Remove the bleeder plug from the disc brake cylinder.