Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE
RM30B0U _54 Brake _010844 BRAKE (FRONT) _0057931 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 3.REMOVE FRONT FLEXIBLE HOSE

a.
C278619
3.115,0.115 3.229,0.271 0.115,0.156 10 A 2.229,0.24 2.344,0.427 0.115,0.188 10 B 2.344,1.104 2.458,1.292 0.115,0.188 10 C 1.573,1.781 1.677,1.969 0.104,0.188 10 D 0.698,1.906 0.823,2.073 0.125,0.167 10 E

Disconnect the brake tube labeled A from the flexible hose using a union nut wrench while holding the flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




b.

Remove the clip labeled B.


c.

Remove the 2 bolts labeled C and D, and then remove the flexible hose clamp labeled E from the knuckle.


d.
C278595
3.01,2.469 3.01,2.792 false 2.188,1.25 2.188,0.625 2.188,0.625 2.427,0.625 false 1.719,1.208 1.719,0.344 1.719,0.344 1.948,0.344 false 2,0.271 2.208,0.49 0.208,0.219 10 *1 2.469,0.563 2.677,0.781 0.208,0.219 10 *2 2.938,2.854 3.146,3.073 0.208,0.219 10 *3
*1 Flexible Hose Bracket
*2 Flexible Hose Clamp
*3 Sensor Clamp


Remove the sensor clamp and flexible hose clamp from the flexible hose bracket.


e.
C127057

Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.