Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR(for 2WD)
RM30B0U _54 Brake _010842 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0057935 REAR SPEED SENSOR(for 2WD) G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(for 2WD)  INSPECTION  


PROCEDURE

Hide 1.INSPECT SKID CONTROL SENSOR

a.

Check the skid control sensor.

Under any of the following conditions, replace the sensor with a new one.

·

The surface of the skid control sensor is cracked, dented, or chipped off.

·

The skid control sensor has been dropped.



Hide 2.INSPECT SKID CONTROL SENSOR WIRE

a.

Check the skid control sensor wire.

Under any of the following conditions, replace the sensor with a new one.

·

The connector or wire harness is scratched, cracked, or damaged.