Home › Steering › STEERING COLUMN › STEERING LOCK SYSTEM
RM30B0U _55 Steering _010850 STEERING COLUMN _0057945 STEERING LOCK SYSTEM D

STEERING COLUMN  STEERING LOCK SYSTEM  DTC CHECK / CLEAR  


NOTICE:
·

The steering lock ECU does not store past DTCs. If any DTCs are output, confirm and record them as soon as possible. Do not turn the engine switch off or clear the DTCs until the DTCs are confirmed and recorded.

·

DTCs may have been stored due to problems unrelated to the steering lock system. Be sure to confirm and record any DTCs output for other systems.

·

When using the Techstream with the engine switch off to troubleshoot:

Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.



CHECK FOR DTC (MAIN BODY ECU)


a.

Turn the engine switch off.


b.

Connect the Techstream to the DLC3.


c.

Turn the engine switch on (IG).


d.

Turn the Techstream on.


e.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.


f.

Check for DTCs.

Body Electrical > Main Body > Trouble Codes
50001 123


CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))


HINT:

The steering lock system DTCs are output from the steering lock ECU via the certification ECU (smart key ECU assembly).


a.

Turn the engine switch off.


b.

Connect the Techstream to the DLC3.


c.

Turn the engine switch on (IG).


d.

Turn the Techstream on.


e.

Enter the following menus: Body Electrical / Smart Key / Trouble Codes.


f.

Check for DTCs.

Body Electrical > Smart Key > Trouble Codes
50001 125


CLEAR DTC (MAIN BODY ECU)


a.

Turn the engine switch off.


b.

Connect the Techstream to the DLC3.


c.

Turn the engine switch on (IG).


d.

Turn the Techstream on.


e.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.


f.

Clear the DTCs.

Body Electrical > Main Body > Clear DTCs
50002 123


CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))


a.

Turn the engine switch off.


b.

Connect the Techstream to the DLC3.


c.

Turn the engine switch on (IG).


d.

Turn the Techstream on.


e.

Enter the following menus: Body Electrical / Smart Key / Trouble Codes.


f.

Clear the DTCs.

Body Electrical > Smart Key > Clear DTCs
50002 125