Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM30B0U _58 Vehicle Interior _010070 LIGHTING (INT) _0057949 VANITY LIGHT A

LIGHTING (INT)  VANITY LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE VANITY LIGHT ASSEMBLY LH

a.
E257049
0.792,1.385 1.156,1.365 false 0.646,1.302 0.958,1.458 0.313,0.156 10 *1
*1 Protective Tape


Using a screwdriver, detach the claw.

HINT:

Tape the screwdriver tip before use.



b.

Detach the guide to disconnect the vanity light assembly LH.


c.
E257050

Detach the 2 claws to remove the vanity light assembly LH from the No. 1 roof wire.


Hide 2.REMOVE VANITY LIGHT BULB

a.
E269141

Remove the vanity light bulb from the No. 1 roof wire.