Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM30B0U _58 Vehicle Interior _010070 LIGHTING (INT) _0057949 VANITY LIGHT A

LIGHTING (INT)  VANITY LIGHT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL VANITY LIGHT BULB

E269142

a.

Install the vanity light bulb to the No. 1 roof wire.


Hide 2.INSTALL VANITY LIGHT ASSEMBLY LH

a.

Attach the 2 claws to connect the No. 1 roof wire to the vanity light assembly LH.


b.

Attach the guide and claw to connect the vanity light assembly LH.