Home › Vehicle Interior › LIGHTING (INT) › REAR DOOR COURTESY SWITCH
RM30B0U _58 Vehicle Interior _010070 LIGHTING (INT) _0057955 REAR DOOR COURTESY SWITCH A

LIGHTING (INT)  REAR DOOR COURTESY SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

a.

Connect the connector.


b.

Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)