Home › Vehicle Interior › LIGHTING (INT) › REAR DOOR COURTESY SWITCH
RM30B0U _58 Vehicle Interior _010070 LIGHTING (INT) _0057955 REAR DOOR COURTESY SWITCH G

LIGHTING (INT)  REAR DOOR COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

a.
E257075
1.802,2.646 2.49,2.521 true 1.708,1.219 2.281,1.573 true 2.531,2.438 2.844,2.594 0.313,0.156 10 *1 2.302,1.552 2.615,1.708 0.313,0.156 10 *2 0.771,1.906 1.083,2.063 0.313,0.156 10 *a
*1 Terminal 1
*2 Switch Body
*a Component without harness connected
(Rear Door Courtesy Light Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
Terminal 1 - Switch body Pushed 10 kΩ or higher
Not pushed Below 1 Ω


If the result is not as specified, replace the rear door courtesy light switch assembly.