Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM
RM30B0U _58 Vehicle Interior _009991 SEAT BELT _0057997 SEAT BELT WARNING SYSTEM W

SEAT BELT  SEAT BELT WARNING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the Techstream on.


d.

Enter the following menus: Utility / Customize Setting.


e.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Driver Side Seatbelt Warning Buzzer If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer If the front passenger side seat belt is unfastened with the front passenger seat occupied, and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON 0:OFF,1:ON Combination meter assembly
50006 7