Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM
RM30B0U _58 Vehicle Interior _009991 SEAT BELT _0057997 SEAT BELT WARNING SYSTEM U

SEAT BELT  SEAT BELT WARNING SYSTEM  TERMINALS OF ECU  


CHECK COMBINATION METER ASSEMBLY


E161130
3.365,0.292 3.771,0.531 0.406,0.24 3.438,0.323 3.719,0.49 0.281,0.167 10 G16

a.

Disconnect the G16 combination meter assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G16-40 (B) - Body ground Y - Body ground Battery power supply Always 11 to 14 V
G16-39 (IG+) - Body ground B - Body ground IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
G16-21 (ET) - Body ground BR - Body ground Ground Always Below 1 Ω



CHECK AIRBAG SENSOR ASSEMBLY


C147673
3.51,0.094 3.844,0.271 0.333,0.177 1.958,0.094 2.292,0.271 0.333,0.177 5.083,0.094 5.417,0.271 0.333,0.177 3.552,0.094 4.125,0.542 0.573,0.448 10 false G92 2,0.094 2.688,0.542 0.688,0.448 10 false M25 5.125,0.094 5.979,0.656 0.854,0.563 10 false N21

Terminal No. Terminal Symbol Destination
N21-15 LBE+ Front seat inner belt assembly LH
N21-23 LBE- Front seat inner belt assembly LH
M25-9 FSR+ Occupant detection ECU
M25-17 FSR- Occupant detection ECU


CHECK OCCUPANT DETECTION ECU


C238368
2.677,0.052 3.021,0.26 0.344,0.208 4.323,0.063 4.667,0.271 0.344,0.208 4.385,0.094 4.844,0.292 0.458,0.198 10 false d16 2.74,0.073 3.198,0.271 0.458,0.198 10 false d15

HINT:

Since the occupant detection ECU uses waterproof connectors, the voltage and waveform cannot be inspected directly. Standard voltage readings and waveforms are indicated for reference only.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
d16-1 - d16-3 W - W-B Battery power supply Always 11 to 14 V
d16-2 - d16-3 GR - W-B Diagnosis (DLC3) Ignition switch ON, Techstream not connected to DLC3 -
d16-3 - Body ground W-B - Body ground Ground Always Below 1 V
d16-4 - d16-3 LG - W-B Airbag sensor assembly communication line Always Below 1 V
d16-5 - d16-3 P - W-B Front passenger side buckle switch ground line Always Below 1 V
d16-6 - d16-3 B - W-B IG power supply Ignition switch ON 11 to 14 V
d16-7 - d16-4 L - LG Airbag sensor assembly communication line Ignition switch ON Pulse generation
d16-8 - d16-5 G - P Front passenger side buckle switch line Always Pulse generation
d15-1 - d15-5 GR - W Rear occupant classification sensor LH power supply line Ignition switch ON 4.9 to 5.1 V
d15-2 - d15-6 V - BR Rear occupant classification sensor RH power supply line Ignition switch ON 4.9 to 5.1 V
d15-3 - d15-5 SB - W Rear occupant classification sensor LH signal line Ignition switch ON Pulse generation
d15-4 - d15-6 B - BR Rear occupant classification sensor RH signal line Ignition switch ON Pulse generation
d15-5 - d16-3 W - W-B Rear occupant classification sensor LH ground line Always Below 1 V
d15-6 - d16-3 BR - W-B Rear occupant classification sensor RH ground line Always Below 1 V