| *1 | Speedometer | *2 | Tachometer |
| *3 | Fuel Receiver Gauge | *4 | Multi-information Display |
METER GAUGE AND WARNING/INDICATOR
| Item | Details |
|---|---|
| Speedometer | Based on a signal received from the wheel speed sensors, the brake actuator assembly (skid control ECU) calculates the vehicle speed and transmits data to the combination meter assembly (CAN). |
| Tachometer | The combination meter assembly receives an engine speed signal from the ECM and the gauge needle operates (CAN). |
| Fuel receiver gauge | The combination meter assembly receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line). |
| Item | Details |
|---|---|
| Open door warning light | Receives door open signals from the main body ECU (multiplex network body ECU) (CAN). |
| Brake warning light | ·
Receives malfunction signals from the brake actuator assembly (skid control ECU) (CAN). ·
Receives parking brake switch on signals from the main body ECU (multiplex network body ECU) (CAN). ·
Brake fluid level warning switch is on (Direct line). |
| Front seat belt warning light | ·
Receives driver side seat belt signals (unfastened) from the airbag sensor assembly (CAN). ·
Receives passenger side seat belt signals (unfastened) from the airbag sensor assembly (CAN). |
| SRS warning light | Receives SRS warning light signals from the airbag sensor assembly (CAN). |
| Engine coolant temperature warning light | Receives engine coolant temperature warning light signals from the ECM (CAN). |
| Charge warning light | ·
Receives charge warning light signals from the ECM (CAN). ·
Receives malfunction signals from the generator assembly (Direct line). |
| Engine oil pressure warning light | Receives malfunction signals from the engine oil pressure switch assembly (Direct line). |
| A/T OIL TEMP warning light | Receives A/T OIL TEMP warning light signals from the ECM (CAN). |
| EPS warning light | Receives EPS warning light signals from the power steering ECU assembly (CAN). |
| MIL | Receives malfunction signals from the ECM (Direct line). |
| Slip indicator light | Receives slip indicator light signals from the brake actuator assembly (skid control ECU) (CAN). |
| VSC OFF indicator light | Receives VSC OFF indicator light signals from the brake actuator assembly (skid control ECU) (CAN). |
| TRAC OFF indicator light*1 | Receives TRAC OFF indicator light signals from the brake actuator assembly (skid control ECU) (CAN). |
| ABS warning light | Receives ABS warning light signals from the brake actuator assembly (skid control ECU) (CAN). |
| Tire pressure warning light*2 | Receives tire pressure warning light signals from the tire pressure warning ECU and receiver (CAN). |
| Fuel level warning light | Receives signals from the fuel sender gauge assembly indicating low or no fuel (Direct line). |
| AWD warning light*1 | Receives AWD warning light signals from the 4WD ECU assembly (CAN). |
| AWD lock indicator light*1 | Receives AWD lock indicator light signals from the 4WD ECU assembly (CAN). |
| AUTO LSD indicator light*3 | Receives AUTO LSD indicator light signals from the brake actuator assembly (skid control ECU) (CAN). |
| BSM indicator light*4 | Receives BSM indicator light signals from the blind spot monitor sensor (CAN). |
| Automatic high beam indicator light*5 | Receives automatic high beam indicator light signals from the main body ECU (multiplex network body ECU) (CAN). |
| Cruise control indicator light | Receives cruise control indicator light signals from the ECM (CAN). |
| Smart warning light*6 | Receives smart warning light signals from the certification ECU (smart key ECU assembly) (CAN). |
| High beam indicator light | Receives high beam indicator light signals from the main body ECU (multiplex network body ECU) (Direct line). |
| Front fog indicator light*7 | Receives front fog light signals from the FOG FR relay (Direct line). |
| Turn indicator light | ·
Receives hazard answer-back signals from the main body ECU (multiplex network body ECU) (CAN). ·
Turn signal light switch is on (Direct line). ·
Hazard warning signal switch is on (Direct line). |
| SPORT indicator light | Receives SPORT indicator light signal from the ECM (CAN). |
| ECO MODE indicator light | Receives ECO MODE indicator light signal from the ECM (CAN). |
| Eco driving indicator light | Receives ecology light indicator signal from the ECM (CAN). |
| SET indicator light | Receives SET indicator light signal from the ECM (CAN). |
| Lane departure alart indicator light*8 | Receives lane departure alart indicator light signals from the lane departure warning camera (CAN). |
| MAINT REQD indicator light*9 | Receives ODO signal from the brake actuator assembly (skid control ECU) (CAN). |
| Washer level indicator light | Receives level warning switch signals from the level warning switch assembly (Direct line). |
*1: for AWD
*2: w/ Tire Pressure Warning System
*3: for 2WD
*4: w/ Blind Spot Monitor System
*5: w/ Automatic High Beam System
*6: w/ Smart Key System
*7: w/ Front Fog Light
*8: w/ Lane Departure Alart System
*9: for U.S.A.