Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM30B0U _58 Vehicle Interior _009872 METER / GAUGE / DISPLAY _0058007 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the Techstream

i.

Connect the Techstream to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the Techstream on.


iv.

Enter the following menus: Utility / Customize / Warning or Display.


v.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the key reminder buzzer sound frequency Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Lane Change Flashing Times Setting Function to change the lane change flashing time 3 00:OFF,01:3,10:5,11:7 Combination meter assembly
50006 7

*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.


Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to enable or disable the eco driving indicator zone display in the multi-information display OFF 0:OFF,1:ON Combination meter assembly
ODO Display Time After IG OFF Setting Function to change the odometer display time 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14
Unit conversion
Tester Display Description Default Setting ECU
Units By Region Function to change the multi-information display unit Ml/g US*1
km/l*2
000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g Combination meter assembly
50006 15

*1: for mph

*2: for km/h




b.

Customizing with the combination meter assembly

i.

Turn the ignition switch to ON.


ii.

Select the setting by referring to the table below.

Setting Part Default Content Setting Relevant ECU
Eco driving indicator light Eco On Function to turn on/off the eco driving indicator light Eco On or Eco OFF Combination meter assembly