Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054983 COMPRESSOR A

HEATING / AIR CONDITIONING  COMPRESSOR  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER COMPRESSOR BRACKET

a.

Disconnect the connector.


b.

Detach the connector clamp.


c.
E271003

Remove the screw and cooler compressor bracket.


Hide 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E271004
0.802,0.698 0.594,0.365 false 0.292,0.25 0.75,0.448 0.458,0.198 10 false SST 1.948,1.667 2.26,1.823 0.313,0.156 10 false *a 0,1.292 0.313,1.448 0.313,0.156 10 false *b
*a Hold
*b Turn


Clamp the cooler compressor in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
E271005

Using a snap ring expander, remove the snap ring.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Detach the connector clamp and remove the magnet clutch rotor.


f.
E271006

Using a snap ring expander, remove the snap ring and magnet clutch stator.