Wear protective gloves. Sharp areas on the parts may injure your hands.
1.REMOVE FRONT SEAT ASSEMBLY RH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL
2.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
3.REMOVE FRONT SEAT CUSHION SHIELD RH
4.REMOVE FRONT INNER SEAT CUSHION SHIELD RH
5.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
6.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Detach the 11 hooks to remove the separate type front seat cushion cover with pad.
7.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Remove the 21 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
8.REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH
Cut off the 20 tack pins which fasten the front seat cushion heater assembly RH, and then remove the front seat cushion heater assembly RH from the separate type front seat cushion cover.
Be careful not to damage the separate type front seat cushion cover and front seat cushion heater assembly RH.