CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the Techstream
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting / Wireless Door Lock.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Wireless Control | Function that turns the wireless door lock control system on or off | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Hazard Answer Back | When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice. |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Open Door Warning | The buzzer sounds when lock is pressed when any of the doors are ajar. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Unlock 2 Operation | Function that unlocks driver door when unlock switch on door control transmitter assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Panic Function | Function to operate theft deterrent system by continuously pressing panic switch on door control transmitter assembly for 0.8 seconds | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock Time | Function that regulates the interval between unlocking and automatic relocking of doors | 60 s | 00:30 s,01:60 s,10:120 s | Main body ECU (Multiplex network body ECU) |
| Wireless Auto Lock | This function turns the wireless auto lock function on or off. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Resp | Wireless door lock buzzer response | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Vol | Wireless door lock buzzer volume | Level 5*1
Level 7*2 |
0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0 | Main body ECU (Multiplex network body ECU) |
*1: w/ Power Back Door System
*2: w/o Power Back Door System
Customizing with the display
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle / Vehicle settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Remote 2-Press Unlock | On | Function that unlocks driver door when unlock switch on door control transmitter assembly is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock. | On or Off | Main body ECU (Multiplex network body ECU) |
| Lock Feedback Volume | 5*1
7*2 |
Wireless door lock buzzer volume | 0, 1, 2, 3, 4, 5, 6 or 7 | Main body ECU (Multiplex network body ECU) |
*1: w/ Power Back Door System
*2: w/o Power Back Door System