Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
RM30B0U _59 Vehicle Exterior _010075 WIPER / WASHER _0058467 WIPER AND WASHER SYSTEM L

WIPER / WASHER  WIPER AND WASHER SYSTEM  PRECAUTION  


PRECAUTION OF WASHER NOZZLE ADJUSTMENT


a.

Do not clean or adjust the washer nozzle with a safety pin, etc. because:

i.

The washer nozzle tip is made of resin and could be damaged.


ii.

Adjustment is not necessary for this spray type washer nozzle. If it is necessary to change the nozzle angle, replace the washer nozzle with one that has a different nozzle angle.

for Front Side: Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE>ADJUSTMENT

for Rear Side: Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Rear Side)>ADJUSTMENT



b.

If the washer nozzle is clogged with wax, etc., bring the vehicle to the workshotp.