Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM30B0U _52 Drivetrain _010989 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0058565 SHIFT LEVER A

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL SHIFT LOCK RELEASE BUTTON

a.

Attach the 2 claw and install the shift lock release button with spring to the position indicator housing.


Hide 2.INSTALL INDICATOR LIGHT

a.

Using a plastic bag, attach the claw and install the indicator light to the position indicator housing.


Hide 3.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.

Install the No. 2 position indicator slide cover to the position indicator slide cover.


Hide 4.INSTALL POSITION INDICATOR SLIDE COVER

a.

Install the position indicator slide cover to the position indicator housing.


Hide 5.INSTALL POSITION INDICATOR LENS

a.

Attach the 4 claw and install the position indicator lens to the position indicator housing.


Hide 6.INSTALL CONTROL POSITION INDICATOR PLATE

a.

Attach the hook and claw, install the control position indicator plate to the position indicator housing.


Hide 7.INSTALL POSITION INDICATOR HOUSING

a.

Install the position indicator housing to the rear upper console panel sub-assembly with the 4 screws.


Hide 8.INSTALL SHIFT LOCK RELEASE BUTTON COVER

a.

Attach the 2 claw and install the shift lock release button cover to the upper console panel sub-assembly.